Version: 2019.4
Introduction to collision
Create a vehicle with Wheel Colliders

Continuous collision detection (CCD)

Continuous collisionA collision occurs when the physics engine detects that the colliders of two GameObjects make contact or overlap, when at least one has a Rigidbody component and is in motion. More info
See in Glossary
detection (CCD) ensures that fast-moving bodies collide with objects instead of passing, or tunnelling, through those objects. Unity provides the following CCD methods:

To use sweep-based CCD, select a RigidBodyA component that allows a GameObject to be affected by simulated gravity and other forces. More info
See in Glossary
in the InspectorA Unity window that displays information about the currently selected GameObject, asset or project settings, allowing you to inspect and edit the values. More info
See in Glossary
window and set Collision DetectionAn automatic process performed by Unity which determines whether a moving GameObject with a Rigidbody and collider component has come into contact with any other colliders. More info
See in Glossary
to Continuous or Continuous Dynamic. For speculative CCD, set Collision Detection to Continuous Speculative.

Sweep-based CCD

Sweep-based CCD uses a Time Of Impact (TOI) algorithm to compute potential collisions for an object by sweeping its forward trajectory using its current velocity. If there are contacts along the object’s moving direction, the algorithm computes the time of impact and moves the object until that time. The algorithm can perform sub steps from that time onwards, computing the velocity after TOI then re-sweep, at the expense of more CPU cycles.

However, because this method relies on linear sweep, it ignores the body’s angular motion, which can cause tunnelling effects when objects are rotating at speed. For example, the flipper in a pinball machine is fixed at one end and rotates around a fixed point. The flipper only has angular motion and no linear motion. Therefore, it can easily miss the collision with the pinball:

A thin stick GameObject with its Continuous Dynamic property enabled. When rotating quickly around the pivot point, the stick doesn’t make contact with the sphere.
A thin stick GameObject with its Continuous Dynamic property enabled. When rotating quickly around the pivot point, the stick doesn’t make contact with the sphere.

Another issue with this method is performance. If you have a large number of high-speed objects with CCD in close proximity, the CCD overhead increases quickly because of the extra sweeping, and the physics engineA system that simulates aspects of physical systems so that objects can accelerate correctly and be affected by collisions, gravity and other forces. More info
See in Glossary
has to perform more CCD sub-steps.

Speculative CCD

Speculative CCD works by increasing an object’s broad-phase axis-aligned minimum bounding box (AABB), based on the object’s linear and angular motion. The algorithm is speculative because it picks all potential contacts during the next physics step. All contacts are then fed into the solver, which makes sure that all contact constraints are satisfied so that an object does not tunnel through any collision.

The following diagram shows how a sphere moving from t0 could have an expected position at t1 if there were no walls in its path. By inflating the AABB with its target pose, the speculative algorithm picks up two contacts with the n1 and n2 normals. The algorithm then tells the solver to respect those contacts so that the sphere doesn’t tunnel through the walls.

Inflated AABB based on current velocity helps detect all potential contacts along the moving trajectory, which enables the solver to prevent tunnelling.

Speculative CCD is generally cheaper than the sweep-based method because contacts are only computed during the collision detection phase, not during the solving and integrating phase. Also, because Speculative CCD expands the broad-phase AABB based on the object’s linear and angular motion, it finds the contacts that sweep-based CCD can miss.

A thin stick GameObject with the Speculative CCD enabled. When rotating quickly around the pivot point, the stick makes contact with the sphere and a collision occurs.
A thin stick GameObject with the Speculative CCD enabled. When rotating quickly around the pivot point, the stick makes contact with the sphere and a collision occurs.

However, speculative CCD can cause a ghost collision, where an object’s motion is affected by a speculative contact point when it shouldn’t be. This is because speculative CCD collects all potential contacts based on the closest point algorithm, so the contact normal is less accurate. This can often make high speed objects slide along tessellated collision features and jump up, even though they shouldn’t. For example, in the following diagram, a sphere starts at t0 and moves horizontally towards the right, with a predicted position at t1 after integration. An inflated AABB overlaps the boxes b0 and b1, and the CCD yields two speculative contacts at c0 and c1. Because speculative CCD generates contacts using the closest point algorithm, c0 has a very inclined normal, which appears to be a ramp to the solver.

The solver assumes that the contact point at c0 is a ramp because the closest point algorithm generated an inaccurate contact normal
The solver assumes that the contact point at c0 is a ramp because the closest point algorithm generated an inaccurate contact normal

Such a very inclined normal causes t1 to jump upward after integration, rather than moving straight forward:

A ghost collision generated at c0 causes the sphere to erroneously jump up instead of move straight forward
A ghost collision generated at c0 causes the sphere to erroneously jump up instead of move straight forward

Speculative CCD can also cause tunneling because speculative contacts are only computed during the collision detection phase. During contact solving, if an object gains too much energy from the solver, it may end up outside the initial inflated AABB after integration. If there are collisions just outside the AABB, the object will tunnel right though.

For example, the following diagram shows a sphere is moving left from t0 while a stick is rotating clockwise. If the sphere gains too much energy from the impact, it may end up exiting the inflated AABB (red dotted rectangle) at t1. If there are collisions just outside the AABB, as shown by the blue box below, the sphere may end up tunneling right through it. This is because the solver only computes contacts inside the inflated AABB, and collision detection isn’t performed during the solving and integrating phase.

The sphere with inflated AABB using speculative CCD, which only computes contacts during the collision detection phase, so tunnelling may occur
The sphere with inflated AABB using speculative CCD, which only computes contacts during the collision detection phase, so tunnelling may occur

  • Speculative collision detection added in 2018.3 NewIn20183
Introduction to collision
Create a vehicle with Wheel Colliders
Copyright © 2023 Unity Technologies
优美缔软件(上海)有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961