Sprite (2D and UI) Import Settings reference
Specify the import settings for this texture when its Texture Type is set to Sprite (2D and UI).
The Sprite (2D and UI) texture type formats the texture asset so that it’s suitable to use in 2D features as a SpriteA 2D graphic objects. If you are used to working in 3D, Sprites are essentially just standard textures but there are special techniques for combining and managing sprite textures for efficiency and convenience during development. More info
See in Glossary. Unity automatically locks Texture Shape to 2D for this texture type.
Properties
| Property | Description | |
|---|---|---|
| Sprite Mode | Specifies how to extract the sprite graphic from the image. | |
| Single | Use the sprite image as is. You can clip and edit the image in the Sprite Editor to refine it further, but Unity treats the Sprite generated from the texture source file as a single asset. | |
| Multiple | Choose this value if the texture source file has several elements in the same image. You can then define the location of the elements in the Sprite Editor so that Unity knows how to split the image into different sub-assets. For example, you can create animation frames from a single sheet with multiple poses, create TilesA simple class that allows a sprite to be rendered on a Tilemap. More info See in Glossary from a single Tilesheet, or create the different parts of a character. |
|
| Polygon | Choose this value to clip the sprite texture according to the mesh defined in the Sprite Editor’s Sprite Custom Outline. | |
| Pixels Per Unit | The number of pixels of width/height in the Sprite image that correspond to one distance unit in world space. | |
| Mesh Type | Specifies the mesh type for the sprite asset you want Unity to generate. This property is visible only when |
|
| Full Rect | Choose this value to create a quad (four-sided polygon) to map the Sprite onto. | |
| Tight | Choose this value to generate a Mesh based on pixel alpha value. The Mesh that Unity generates generally follows the shape of the Sprite. Note: Any Sprite that’s smaller than 32x32 uses Full Rect, even when Tight is specified. |
|
| Extrude Edges | Controls how much area to leave around the Sprite in the generated Mesh. | |
| Pivot | The location in the image where the sprite’s local coordinate system originates. Choose one of the pre-set options, or select Custom to set your own Pivot location in X and Y. This property is visible only when Sprite Mode is set to Single. |
|
| Generate Physics Shape | Indicates whether to generate a default Physics Shape from the outline of the sprite if you don’t define a Custom Physics Shape. This property is only visible when you set Sprite Mode to Single or Multiple. |
|
| Open Sprite Editor | Open the Sprite Editor which you can use to define how you want Unity to separate the elements on an image with multiple Sprite Mode elements (to create sub-Assets) or refine the shape, size, and pivot position of a Polygon shape. This button only appears if your project uses the 2D Sprite package. For information about how to find and install packages in the Unity Package Manager, see Finding packages and Installing from the registry. This property is visible only when is set to . |
|
| Install 2D Sprite Package | Installs the 2D Sprite package. The Open Sprite Editor button becomes visible after Unity installs the required package. This button only appears if your project currently doesn’t have the 2D Sprite package installed. |
|
| sRGB (Color Texture) | Indicates whether the texture is in gamma space. Enable this property for non-HDR color textures such as albedo and specular color. If the texture stores information that you need the exact value for, like smoothness or metalness values, disable this property. | |
| Alpha Source | Specifies how Unity generates the alpha value for the texture asset from the texture source file. | |
| None | The texture asset doesn’t have an alpha channel, whether or not the texture source file has one. | |
| Input Texture Alpha | Unity applies the alpha channel from the texture source file to the texture asset, if the texture source file has an alpha channel. | |
| From Gray Scale | Unity generates the alpha channel for the texture asset from the average values the texture source files RGB channels. | |
| Alpha is Transparency | Indicates whether to dilate the color channels. This helps to avoid filtering artifacts on the edges of the alpha channel if the alpha channel represents transparency. | |
| Remove PSD Matte | Indicates whether to apply special processing for Photoshop files that use transparency (blending color pixels with white). Note: This is only available for PSD files. |
|
| Non Power of 2 | Specifies how Unity scales the dimension size if the texture source file has a non-power of two (NPOT) dimension size. For more information on NPOT dimension sizes, see Importing Textures. | |
| None | Texture dimension size stays the same. | |
| To nearest | Scales the Texture to the nearest power-of-two dimension size at import time. For example, a 257x511 px Texture is scaled to 256x512 px. Note that PVRTC formats require Textures to be square (that is width equal to height), so the final dimension size is upscaled to 512x512 px. | |
| To larger | Scales the Texture to the power-of-two dimension size of the largest dimension size value at import time. For example, a 257x511 px Texture is scaled to 512x512 px. | |
| To smaller | Scales the Texture to the power-of-two dimension size of the smallest dimension size value at import time. For example, a 257x511 px Texture is scaled to 256x256 px. | |
| Read/Write | Indicates whether to access the texture data from scripts using Texture2D.SetPixels, Texture2D.GetPixels and other TextureAn image used when rendering a GameObject, Sprite, or UI element. Textures are often applied to the surface of a mesh to give it visual detail. More info See in Glossary methods. Internally, Unity uses a copy of the Texture data for script access, which doubles the amount of memory required for the Texture. This property is therefore disabled by default, and you should enable it only if you require script access. For more information, see Texture.isReadable. |
|
| Generate Mipmap | Indicates whether to generate a mipmap for this texture. | |
| Mipmap Limit | Disable this option to use all mipmap levels, regardless of the Mipmap Limit settings in the Quality menu. This property only appears if you set Texture Shape to 2D or 2D Array. Other texture shapes always use all mipmap levels. | |
| Mipmap Limit Group | Select the Mipmap Limit group this texture should be part of. The default option is None (Use Global Mipmap Limit). This property only appears if you set Texture Shape to 2D or 2D Array. Other texture shapes always use all mipmap levels. | |
| Mipmap Filtering | Specifies the method Unity uses to filter mipmap levels and optimize image quality. This property is visible only when Generate Mipmap is set to true. |
|
| Box | Makes mipmap levels smoother as they decrease in dimension size. | |
| Kaiser | Runs a sharpening algorithm on mipmap levels as they decrease in dimension size. Use this option if your textures are too blurry when far away. The algorithm is of the Kaiser Window type. For more information, see Wikipedia. | |
| Preserve Coverage | Indicates whether the alpha channel in generated mipmaps preserves coverage during the alpha text. For more information, see TextureImporterSettings.mipMapsPreserveCoverage. This property is visible only when Generate Mipmap is set to true. |
|
| Alpha Cutoff | The reference value that controls the mipmap coverage during the alpha test. This property is visible only when Preserve Coverage is set to true. |
|
| Replicate Border | Indicates whether to stop colors bleeding out to the edge of the lower mipmap levels. This is useful for light cookies. This property is visible only when Generate Mipmap is set to true. |
|
| Fadeout to Gray | Indicates whether mipmap levels should fade to gray as the mipmap levels progress. This is useful for detail maps. The left-most scroll is the first mipmap level to begin fading out. The right-most scroll defines the mipmap level where the texture is completely grayed out. This property is visible only when Generate Mipmap is set to true. |
|
| Ignore PNG Gamma | Indicates whether to ignore the gamma attribute in PNG files. This option is only visible if the texture source file is a PNG. |
|
| Wrap Mode | Specifies how the texture behaves when it tiles. | |
| Repeat | Repeats the texture in tiles. | |
| Clamp | Stretches the texture’s edges. | |
| Mirror | Mirrors the texture at every integer boundary to create a repeating pattern. | |
| Mirror Once | Mirrors the texture once, then clamps it to edge pixels. Note: Some mobile devices don’t support Mirror Once. In this case, Unity uses Mirror instead. |
|
| Per-axis | Provides options you can use to individually control how Unity wraps textures on the U and V axis. | |
| Filter Mode | Specifies how Unity filters the texture when the texture stretches during 3D transformations. | |
| Point (no filter) | The texture appears blocky up close. | |
| Bilinear | The texture appears blurry up close. | |
| Trilinear | Like Bilinear, but the texture also blurs between the different mipmap levels. | |
| Aniso Level | Controls the texture quality when you view the texture at a steep angle. Anisotropic filtering is good for floor and ground Textures but is resource intensive. For more information, see Importing textures. | |
In addition, you can use the Platform-specific overrides panel to set default options and overrides for specific platforms.
Additional resources
Copyright © 2023 Unity Technologies
优美缔软件（上海）有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961