There are two locations to configure settings that affect how your app is built:
The output package includes an APK, and an APK expansion file (OBB) if the Split Application Binary option is selected in the Player settings. For more information on OBB files, see OBB Support.
To optimize for download and installation size, enable the Split APKs by target architecture option in the Player settings. The Split APKs by target architecture option produces one set of APKs and OBBs for each device architecture selected in the Target Architecture list in the Player settings. You can upload this set of APKs (and OBBs, if enabled) to the Google Play, or other, store instead of a FAT APK in which all of the selected architectures are included into a single APK. For more information on this feature, see Multiple APK support on the Android Developer website.
To configure and build apps for Android, access the Build Settings window (File > Build Settings). In Platform, select Android.
To set Android as your default build platform, click the Switch Platform button.
After you specify your build settings, click the BuildThe process of compiling your project into a format that is ready to run on a specific platform or platforms. More info
See in Glossary button to create your build. To build the app, click Build And Run to create and run your build on the platform you have specified.
| Setting | Function |
|---|---|
| Texture CompressionA method of storing data that reduces the amount of storage space it requires. See Texture Compression, Animation Compression, Audio Compression, Build Compression. See in Glossary |
The Unity Android build system supports the following texture compression format options: Don’t override, DXT (Tegra), PVRTCPowerVR Texture Compression (PVRTC) is a fixed-rate texture format that compresses textures to significantly reduce file sizes without causing a noticeable reduction in image quality. More info See in Glossary (PowerVR), ETC (default), ETC2 (GLES 3.0), and ASTCAdaptive Scalable Texture Compression (ASTC) A block-based texture format that compresses textures to significantly reduce file sizes without cau sing a noticable reduction in image quality. More info See in Glossary. For advice on using these formats, see the Texture Compression section below. |
| ETC2 fallback | 32-bit, 16-bit, and 32-bit, half resolution. |
| Build System | |
| Internal (deprecated) - Generate the output package (APK) using the internal Unity build process, based on Android SDK utilities. Selecting Internal hides the Export Project checkbox. | |
| Gradle - Generate the output package (APK) using the Gradle build system. Supports direct Build and Run and exporting the Project to a directory. This is the default Build System for Unity. | |
| Export Project | Export the Project as a Gradle project that you can import into Android Studio. |
| Build AppBundle (Google Play) | Build an Android App Bundle for distribution on Google Play. Selecting this option also lets you configure the Warn about App Bundle Size option in the Player settingsSettings that let you set various player-specific options for the final game built by Unity. More info See in Glossary. |
| Run Device | A drop-down list of attached devices on which you can test your build. If you connect a new device or you don’t see an attached device in the list, click the Refresh button to reload the list. |
| Development Build | A development build includes debug symbols and enables the ProfilerA window that helps you to optimize your game. It shows how much time is spent in the various areas of your game. For example, it can report the percentage of time spent rendering, animating or in your game logic. More info See in Glossary. Selecting Development Build allows you to select the Autoconnect Profiler, Script Debugging, and ScriptsA piece of code that allows you to create your own Components, trigger game events, modify Component properties over time and respond to user input in any way you like. More info See in Glossary Only Build options. |
| Autoconnect Profiler | Allows the Profiler to automatically connect to the build. Selectable when the Development Build option is selected. For more information on the Profiler, see Profiler Overview. |
| Script Debugging | Allow script debuggers to attach to the Player remotely. Enabled when the Development Build option is selected. |
| Scripts Only Build | Check this option to build just the scripts in the current Project. Enabled when the Development Build option is selected. |
| Compression Method | Compress the data in your Project at build time. Choose between the following methods: |
| Default - The default compression is ZIP, which gives slightly better compression results than LZ4 and LZ4HC, but data is slower to decompress. | |
| LZ4 - A fast compression format that is useful for development builds. Using LZ4 compression can significantly improve loading time of games/apps built with Unity. For more information, see BuildOptions.CompressWithLz4. | |
| LZ4HC - A high compression variant of LZ4 that is slower to build but produces better results for release builds. Using LZ4HC compression can significantly improve loading time of games/apps built with Unity. For more information, see BuildOptions.CompressWithLz4HC. | |
| SDKs for App Stores | Select which third party app stores to integrate with. To include an integration, click Add next to an App Store name. The Unity Package Manager automatically downloads and includes the relevant integration package. |
Unity uses the Ericsson Texture Compression (ETC) format for textures that don’t have individual texture formatA file format for handling textures during real-time rendering by 3D graphics hardware, such as a graphics card or mobile device. More info
See in Glossary overrides. When building an APK to target specific hardware, use the Texture Compression3D Graphics hardware requires Textures to be compressed in specialized formats which are optimized for fast Texture sampling. More info
See in Glossary option to override this default behavior. Texture Compression is a global setting for the Project. If a texture has a specific override on it, that texture is not affected by the Texture Compression setting. For additional information, see TexturesAn image used when rendering a GameObject, Sprite, or UI element. Textures are often applied to the surface of a mesh to give it visual detail. More info
See in Glossary.
For additional information on textures and texture compression, see the Mobile and WebGL specific formats and Notes on Android sections on the Texture compression formats for platform-specific overrides page.
Note: Texture Compression is a global setting. Individual textures override the global setting.
For Android devices that don’t support ETC2 (which don’t support GL ES3), you can override the default ETC2 texture decompression by choosing from 32-bit, 16-bit, or 32-bit with half the resolution formats.
This option allows you to choose between the uncompressed image quality and the amount of memory the uncompressed texture occupies. 32-bit RGBA texture is the highest quality format, and takes twice the required disk space as the 16-bit format, but a texture in 16-bit might lose some valuable color information. 32-bit half-resolution reduces the memory requirement further, but the texture is likely to become blurry.
Unity supports two Android build systems: GradleAn Android build system that automates several build processes. This automation means that many common build errors are less likely to occur. More info
See in Glossary and Internal.
The steps involved with building for Android are:
Preparing and building the Unity Assets.
Compiling scripts.
Processing the plug-insA set of code created outside of Unity that creates functionality in Unity. There are two kinds of plug-ins you can use in Unity: Managed plug-ins (managed .NET assemblies created with tools like Visual Studio) and Native plug-ins (platform-specific native code libraries). More info
See in Glossary.
Splitting the resources into the parts that go to the APK and the OBB, if Split Application Binary is selected.
Building the Android resources using the AAPT utility (internal build only.)
Generating the Android manifest.
Merging the library manifests into the Android manifest (internal build only.)
Compiling the Java code into the Dalvik Executable format (DEX) (internal build only.)
Building the IL2CPPA Unity-developed scripting back-end which you can use as an alternative to Mono when building projects for some platforms. More info
See in Glossary library, if IL2CPP Scripting Backend is selected.
Building and optimizing the APK and OBB packages.
Gradle build system
The Gradle build system uses Gradle to build an APK or export a Project in Gradle format, which can then be imported to Android Studio. When you select this build system, Unity goes through the same steps as the Internal build system excluding resource compilation with AAPT, merging manifests, and running DEX. Unity then generates the build.gradle file (along with the other required configuration files) and invokes the Gradle executable, passing it the task name and the working directory. Finally, the APK is built by Gradle.
For more details, see Gradle for Android.
Internal build system
The Internal build system creates an APK using the Android SDK utilities to build and optimize the APK and OBB packages. For more information about OBB files, see OBB Support.
If you need more control over the build pipeline, or to make changes that Unity does not normally allow (for example, fine tuning the manifest files that are automatically generated by Unity), you can export your Project and import it into Android Studio. Exporting a Project is only available when you have selected Gradle as your Build System.
To export the Project:
When the export finishes, open Android Studio and import your project. For more information on importing projects to Android Studio, see the Migrate to Android Studio section of the Android Developer documentation.
The Build Settings window offers two options: Build and Build and Run. Using either option saves the output packages (APK and OBB, if enabled) to the path that you select. You can publish these packages to the Google Play Store, or install them on your device manually with the help of Android Debug Bridge (ADB). For further information about installing apps manually, see the Run your app section of the Android Developer documentation. For information on ADBAn Android Debug Bridge (ADB). You can use an ADB to deploy an Android package (APK) manually after building. More info
See in Glossary commands, see the Android Debug Bridge section of the Android Developer documentation.
Selecting Build and Run saves the output packages to the file path you specify, while also installing your app on the Android device connected to your computer.
If the Split Application Binary option is enabled, the OBB file is pushed to the correct location on your device. If Development BuildA development build includes debug symbols and enables the Profiler. More info
See in Glossary is checked, Unity also sets up a Profiler tunnel and enables CheckJNI. After that, the app is launched. The Split Application Binary setting is located in the Publishing Settings section of the Player settings.
Tip: Specify the output path for the packages and then use the Ctrl+B (Windows) or Cmd+B (macOS) keyboard shortcut to Build and Run using the saved output path.
2018–11–19 Page amended
Updated functionality in 5.5
Updated the Build Settings Configuration options