Windows Build Settings

To create a build for Windows, go to Build Settings (menu: File > Build Settings). In the Platform list, select Windows, then select Switch Platform.

Use these settings to configure how Unity builds your application.

Setting		Function
Target platform		Select Windows to build your app for the Windows platform.
Architecture		Select the CPU to build for (only applies to Build And Run).
	Intel 64-bit	Intel/AMD 64-bit CPU architecture.
	Intel 32-bit	Intel 32-bit CPU architecture.
	ARM 64-bit	ARM 64-bit CPU architecture.
Build and Run on		Select the target device or transport to deploy and launch the app during Build And Run.
	Local Machine	Deploys and launches the app on your local PC.
	Remote Device (via DevicePortal)	Deploys and launches the app to a connected device over the Device Portal transport. For more information, refer to Windows Device Portal deployment.
Copy PDB files		Enable this setting to include Microsoft program database (PDB) files in the built Windows Player. PDB files contain debugging information for your application, but might increase the size of your Player. For more information, see Windows debugging.
Create Visual Studio Solution		Enable this setting to generate Visual Studio solution files for your project so that you can build it from Microsoft Visual Studio directly.
Development BuildA development build includes debug symbols and enables the Profiler. More info See in Glossary		Enable this setting to include scripting debug symbols and the ProfilerA window that helps you to optimize your game. It shows how much time is spent in the various areas of your game. For example, it can report the percentage of time spent rendering, animating, or in your game logic. More info See in Glossary in your build. When you enable this, Unity sets the `DEVELOPMENT_BUILD#define` for testing purposes. When you select Development Build, Autoconnect Profiler, Deep Profiling Support, Script Debugging, and Wait for Managed Debugger settings also become available.
Autoconnect Profiler		Enable this setting to automatically connect the Unity Profiler to your build.
Deep Profiling Support		Enable this setting to select Deep Profiling in the Profiler. This makes the Profiler instrument every function call in your application and returns more detailed profiling data. When you enable Deep Profiling Support, it might slow down script execution.
Script debugging		Enable this setting to allow your script code to be debugged. Not available on WebGLA JavaScript API that renders 2D and 3D graphics in a web browser. The Unity WebGL build option allows Unity to publish content as JavaScript programs which use HTML5 technologies and the WebGL rendering API to run Unity content in a web browser. More info See in Glossary.
Wait for Managed Debugger		Enable this setting to be prompted to attach a debugger before Unity executes any script code.
CompressionA method of storing data that reduces the amount of storage space it requires. See Texture Compression, Animation Compression, Audio Compression, Build Compression. See in Glossary Method (Not available on WebGL platform)		Compress the data in your application when you build it. This includes AssetsAny media or data that can be used in your game or project. An asset may come from a file created outside of Unity, such as a 3D Model, an audio file or an image. You can also create some asset types in Unity, such as an Animator Controller, an Audio Mixer or a Render Texture. More info See in Glossary, ScenesA Scene contains the environments and menus of your game. Think of each unique Scene file as a unique level. In each Scene, you place your environments, obstacles, and decorations, essentially designing and building your game in pieces. More info See in Glossary, Player settings, and GI data. Choose from the following methods:
	Default	On Windows, Mac, Linux, and iOS, there is no compression by default. On Android, the default compression is ZIP, which provides better compression results than LZ4HC; however, data is slower to decompress.
	LZ4	A fast compression format that’s useful for development builds. For more information, see BuildOptions.CompressWithLz4.
	LZ4HC	A high compression variant of LZ4 that’s slower to build but produces better results for release builds. For more information, see BuildOptions.CompressWithLz4HC.

Asset Import Overrides

Use Asset Import Overrides to locally override all texture import settings to speed up import and platform switch time. You must avoid shipping your final build with any import overrides, but you can use this setting during development to speed up iteration time, especially if assets such as low resolution textures are not of any concern.

Setting		Function
Max Texture Size		Override the maximum imported texture size. Unity imports textures in the lower of two values: this value, or the Max Size value specified in Texture import settings. The time it takes to import a texture is roughly proportional to the amount of pixels it contains; therefore, reducing maximum allowed texture size can speed up the import times. As this setting might result in lower resolution textures, use it only for development purposes.
Texture Compression		Override the texture compression options set in Texture import settings. This only affects textures imported into one of the compressed texture formats.
	Force Fast Compressor	Use a faster yet lower quality texture compression mode for formats where this is applicable (BC7, BC6H, ASTC, ETC, ETC2). Typically, this results in more compression artifacts, but for many formats the compression itself is many times faster (2 to 20 times faster). This setting also disables the Crunch texture compression format on any textures that have it. The effect is the same as if all textures had their Compressor Quality set to Fast setting in their platform’s Texture import settings.
	Force Uncompressed	Don’t compress the textures; use uncompressed formats instead. Note that while this is faster to import because it skips the whole texture compression process, the resulting textures take up more memory, game data size, and can impact rendering performance. Texture import settings. This option has the same effect as all textures that have their Compression set to None in their platforms’ Texture Import settings.

You can also set Asset import override settings using -overrideMaxTextureSize and -overrideTextureCompression Editor Command line arguments to change any initial application import.

Building your Windows application

To build your application, select from one of the following options:

Build: Compile your application. The default build is incremental, except for the first build, which is always a full non-incremental (clean) build. To force a clean build instead of an incremental build, select Clean Build from the dropdown menu.

Build and run: Compile your application and open it in your native platform. This option always uses the incremental build.

Windows Player build binaries

When you build a Unity title on the Windows platform, Unity produces the following files, where ProjectName is the name of your application:

ProjectName.exe - The project executable file, i.e. your project application. This contains the program entry point which calls into the Unity engine when launched.
UnityPlayer.dll - The DLL file that contains all the native Unity engine code. It’s signed with the Unity Technologies certificate, which lets you verify that no malicious entities have tampered with your engine.
*.pdb files - Symbol files for debugging. Unity copies these to the build directory if you enable Copy PDB files in the Build Settings window.
WinPixEventRuntime.dll - This DLL enables Introducing PIX on Windows (beta) support. Unity only creates this file if you enable the Development Build option in the Build Settings window.
ProjectName_Data folder - This folder contains all the data needed to run your application.

How to rebuild your application

The path to the source code for ProjectName.exe is in the WindowsPlayer folder: Editor\Data\PlaybackEngines\WindowsStandaloneSupport\Source\WindowsPlayer.

To modify your application, or ship the code which you built yourself (if you want to sign it, for example), you must rebuild it and place it in your built game directory.

To build your application outside of Unity, you need Visual Studio 2019 or 2022 with Desktop development with C++ workload installed.

Windows standalone Player build binaries changed in 2017.2 NewIn20172
Windows XP support in Standalone Player removed in 2018.1

Windows Player: IL2CPP Scripting Backend

Universal Windows Platform

"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。

公安部备案号:

31010902002961

法律条款隐私政策 Cookies