Version: 2022.3
Language : English
Articulations
Articulation Body component reference

Introduction to physics articulations

A physics articulation is a set of Articulation Bodies organized in a logical tree, in which each parent-child relationship reflects mutually constrained relative motion.

The main purpose of physics articulations is to provide a realistic physics behavior for commercial and industrial non-gaming applications that involve jointsA physics component allowing a dynamic connection between Rigidbody components, usually allowing some degree of movement such as a hinge. More info
See in Glossary
. For example, they make it a lot easier than the regular Joints to simulate robotic arms and kinematic chains.

Articulation setup vs. regular joints

In the most basic scenario to get two physical bodies linked with a single joint, you can either build an articulation or use regular joints, as described in the following table.

Articulation setup Setup with regular joint
Hierarchy • GameObject + Articulation Body
   • GameObject + Articulation Body
• GameObject + Rigid Body
• GameObject + Rigid Body + Joint
Relationship The GameObjects have a hierarchical relationship (parent-child).
Note: The physics engine uses the Unity transform hierarchy to express the parent-child relationship.
The GameObjects don’t necessarily have a hierarchical relationship.
Note: In more advanced scenarios, you can freely simulate kinematic loops.
Physical bodies Both GameObjectsThe fundamental object in Unity scenes, which can represent characters, props, scenery, cameras, waypoints, and more. A GameObject’s functionality is defined by the Components attached to it. More info
See in Glossary
have an Articulation Body component, which defines physical body properties (among others).
Both GameObjects have a RigidBodyA component that allows a GameObject to be affected by simulated gravity and other forces. More info
See in Glossary
component, which defines physical body properties (among others).
Joint The Articulation Body of the child GameObject holds the joint properties, where you can select the joint type. One of the GameObjects also has a Joint component. The joint properties depend on the type of Joint component that you add.

However, the overall resulting behavior is not the same in both cases, especially if you extend this principle to multiple physical bodies and joints.

If you try to use regular joints to model kinematic chains such as in a rag doll, robotic arm, or mechanism with several concurrent hinges, the physics engineA system that simulates aspects of physical systems so that objects can accelerate correctly and be affected by collisions, gravity and other forces. More info
See in Glossary
might encounter unsolvable scenarios and leave certain constraints unsatisfied. This might result in stuttery and unrealistic motion. Not only would the joints look peculiar, but it would also be impossible to use them for simulating a real device, impeding efforts to model or prototype industrial designs.

Building an Articulation in Unity

To build a physics articulation in Unity, you must add an Articulation Body component to each GameObject that the articulation consists of. Each Articulation Body component allows you to configure in one single place:

  • The physical body properties of the corresponding GameObject. Basically, its mass and the way it responds to the physics environment.

  • The type and properties of the joint that links the GameObject to its parent GameObject (except for the root of the articulation).

The example below shows a simple physics articulation that involves 3 physical bodies and 2 joints:

To build such an articulation in Unity:

  1. Create a linear hierarchy of 3 GameObjects.

  2. Add an Articulation Body component to each of these 3 GameObjects.

  3. Configure each Articulation Body component (according to the above graphic):

GameObject Articulation Body component configuration
A (root) You can only define physical body properties for GameObject A.
B You can define:
• Physical body properties for GameObject B.
• The type and properties of the joint with GameObject A.
C You can define:
• Physical body properties for GameObject C.
• The type and properties of the joint with GameObject B.

Note: By definition, an articulation can only have one root and is not allowed to have kinematic loops. If you need kinematic loops, use regular joints.

Limitation: If you want to build very long articulation chains, you must still be aware that Unity supports a maximum hierarchy depth of 64 GameObjects.

Articulation Joint types and degrees of freedom

There are four types of articulation joints that you can select and configure through an Articulation Body:

  • Fixed jointA joint type that is completely constrained, allowing two objects to be held together. Implemented as a spring so some motion may still occur. More info
    See in Glossary
    : sets a rigid, unbreakable and unstretchable link between bodies.

  • Prismatic joint: prevents all motion except sliding along a particular axis.

  • Revolute joint: allows rotation around a particular axis (like a hinge).

  • Spherical joint: anatomical joint, which allows two swings and one twist.

All locked degrees of freedom in an articulation are unbreakable and unstretchable by design. To achieve this, the physics engine uses the reduced coordinate space, where bodies only have coordinates about unlocked axes of motion.

In contrast, for the regular iterative joints, the physics engine enforces the maximal coordinate space, which only guarantees the satisfaction of constraints if the solver is able to converge after a set of iterations.

Physics articulation demo

Check out Unity’s robotics demo project to experiment with a serial link robot arm with articulation joints.

Articulations
Articulation Body component reference
Copyright © 2023 Unity Technologies
优美缔软件(上海)有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961