Version: 2021.3

MinMaxCurve

struct in UnityEngine

切换到手册

描述

最小值-最大值曲线的脚本接口。

最小值-最大值曲线描述的函数采用最小值和最大值之间的值,并基于 ParticleSystem.MinMaxCurve.mode 返回值。根据模式,可能返回随机值。 对于需要曲线的模式,返回值取决于在 ParticleSystem Inspector 中设计的一条或两条曲线,这些曲线可以计算得到介于 -n 与 n 之间的单个值,其中 n 是也在 Inspector 中设置的常量。请参阅 ParticleSystemCurveMode 以了解更多信息。

另请参阅:ParticleSystem

using UnityEngine;

// This example shows setting a constant rate value. public class ConstantRateExample : MonoBehaviour { ParticleSystem myParticleSystem; ParticleSystem.EmissionModule emissionModule;

void Start() { // Get the system and the emission module. myParticleSystem = GetComponent<ParticleSystem>(); emissionModule = myParticleSystem.emission;

GetValue(); SetValue(); }

void GetValue() { print("The constant value is " + emissionModule.rateOverTime.constant); }

void SetValue() { emissionModule.rateOverTime = 10.0f; } }
using UnityEngine;

// This example shows using 2 constants to drive the rate. public class TwoConstantsRateExample : MonoBehaviour { ParticleSystem myParticleSystem; ParticleSystem.EmissionModule emissionModule;

void Start() { // Get the system and the emission module. myParticleSystem = GetComponent<ParticleSystem>(); emissionModule = myParticleSystem.emission;

GetValue(); SetValue(); }

void GetValue() { print(string.Format("The constant values are: min {0} max {1}.", emissionModule.rateOverTime.constantMin, emissionModule.rateOverTime.constantMax)); }

void SetValue() { emissionModule.rateOverTime = new ParticleSystem.MinMaxCurve(0.0f, 10.0f); } }
using UnityEngine;

// This example shows using a curve to drive the rate. public class CurveRateExample : MonoBehaviour { ParticleSystem myParticleSystem; ParticleSystem.EmissionModule emissionModule;

// We can "scale" the curve with this value. It gets multiplied by the curve. public float scalar = 1.0f;

AnimationCurve ourCurve;

void Start() { // Get the system and the emission module. myParticleSystem = GetComponent<ParticleSystem>(); emissionModule = myParticleSystem.emission;

// A simple linear curve. ourCurve = new AnimationCurve(); ourCurve.AddKey(0.0f, 0.0f); ourCurve.AddKey(1.0f, 1.0f);

// Apply the curve. emissionModule.rateOverTime = new ParticleSystem.MinMaxCurve(scalar, ourCurve);

// In 5 seconds we will modify the curve. Invoke("ModifyCurve", 5.0f); }

void ModifyCurve() { // Add a key to the current curve. ourCurve.AddKey(0.5f, 0.0f);

// Apply the changed curve. emissionModule.rate = new ParticleSystem.MinMaxCurve(scalar, ourCurve); } }
using UnityEngine;

// This example shows using 2 curves to drive the rate. public class TwoCurveRateExample : MonoBehaviour { ParticleSystem myParticleSystem; ParticleSystem.EmissionModule emissionModule;

AnimationCurve ourCurveMin; AnimationCurve ourCurveMax;

// We can "scale" the curves with this value. It gets multiplied by the curves. public float scalar = 1.0f;

void Start() { // Get the system and the emission module. myParticleSystem = GetComponent<ParticleSystem>(); emissionModule = myParticleSystem.emission;

// A horizontal straight line at value 1. ourCurveMin = new AnimationCurve(); ourCurveMin.AddKey(0.0f, 1.0f); ourCurveMin.AddKey(1.0f, 1.0f);

// A horizontal straight line at value 0.5. ourCurveMax = new AnimationCurve(); ourCurveMax.AddKey(0.0f, 0.5f); ourCurveMax.AddKey(1.0f, 0.5f);

// Apply the curves. emissionModule.rateOverTime = new ParticleSystem.MinMaxCurve(scalar, ourCurveMin, ourCurveMax);

// In 5 seconds we will modify the curve. Invoke("ModifyCurve", 5.0f); }

void ModifyCurve() { // Create a "pinch" point. ourCurveMin.AddKey(0.5f, 0.7f); ourCurveMax.AddKey(0.5f, 0.6f);

// Apply the changed curve. emissionModule.rateOverTime = new ParticleSystem.MinMaxCurve(scalar, ourCurveMin, ourCurveMax); } }
using UnityEngine;

// This example shows how to retrieve existing keys from a MinMaxCurve public class ReadCurveExample : MonoBehaviour { void Start() { // Get the system and the emission module. var myParticleSystem = GetComponent<ParticleSystem>(); var emissionModule = myParticleSystem.emission;

// Get the curve (assuming the MinMaxCurve is in Curve mode) AnimationCurve curve = emissionModule.rateOverTime.curve;

// Get the keys Keyframe[] keys = curve.keys; } }

变量

constant设置常量值。
constantMax为上限设置常量。
constantMin为下限设置常量。
curve设置曲线。
curveMax为上限设置曲线。
curveMin为下限设置曲线。
curveMultiplier设置要应用于曲线的乘数。
mode设置模式,最小值-最大值曲线使用该模式计算值。

构造函数

ParticleSystem.MinMaxCurve用于整个曲线的单个常量值。

公共函数

Evaluate手动查询曲线以基于所处模式计算值。
Copyright © 2023 Unity Technologies
优美缔软件(上海)有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961