Version: 2021.3
渐进光照贴图程序
Lightmapping using Enlighten Baked Global Illumination

渐进 GPU 光照贴图 (Progressive GPU Lightmapper)(预览)

注意:这是一个预览功能,将来可能会更改。如果有使用此功能的场景,可能需要在以后的发行版中更新这些场景。在该功能尚未正式发布之前,请勿在大规模生产环境中依赖此功能。

The Progressive GPU Lightmapper is a backend for the Progressive Lightmapper which uses your computer’s GPU and Dedicated Video Ram (VRAM) to generate baked lightmaps and Light Probes.

硬件和软件要求

为了使用渐进 GPU 光照贴图,您的计算机必须满足以下最低规格:

  • 至少一个支持 OpenCL 1.2 的 GPU
  • At least 4GB of VRAM dedicated to that GPU
  • 一个支持 SSE4.1 指令的 CPU

如果您正在烘焙的场景所需的 VRAM 多于指定 GPU 上可用 VRAM,则烘焙时间会显著增加。有关可帮助您减少烘焙场景所需时间的信息,请参阅性能。

The Progressive GPU Lightmapper does not support CPU OpenCL devices.

性能

The Progressive GPU Lightmapper bakes faster than the Progressive CPU Lightmapper, unless lightmapper tiling is active.

However, the specifications of the GPU you use to bake and the amount of VRAM dedicated to that GPU both influence your experience of the lightmapper’s performance.

Other applications competing for GPU resources also have an impact on baking performance. Depending on your hardware vendor, reductions in the amount of VRAM available to Unity can slow down the bake, cause it to fail, or even result in the Progressive GPU Lightmapper falling back to the CPU if the GPU cannot meet minimum memory requirements. Closing other applications while you are working with this functionality can improve stability and performance.

In order to achieve results of the same quality as the Progressive CPU Lightmapper, the Progressive GPU Lightmapper needs up to four times more indirect light samples. The Progressive CPU Lightmapper uses an approach called branched path tracing, which launches more light rays at each bounce. The branched path tracing approach is not suitable for GPUs.

Unity provides a spreadsheet to help you determine how much memory the Progressive GPU Lightmapper needs to bake your scene. For more information see the Progressive GPU Lightmapper Memory Spreadsheet .

Preventing baking speed slowdowns caused by lightmapper tiling

The Progressive GPU Lightmapper includes a feature called lightmapper tiling. Lightmapper tiling prevents the Progressive GPU Lightmapper from falling back to the Progressive CPU Lightmapper when Unity has used up its GPU memory allocation. Instead, Unity allocates some temporary memory on the CPU, then bakes your lighting in tiles that are sized to match the amount of GPU memory available. Lightmapper tiling is active only when Unity can’t access enough GPU memory to bake the entire lightmap. The Progressive CPU Lightmapper does not include a tiling feature.

When lightmapper tiling is active, progressive updates cease in the Scene view and the baking process. However, the Progressive updates setting in the Lighting window does not visibly deactivate. Baking a scene when lightmapper tiling is active is slower than baking the same scene without tiling.

It is not possible to disable tiling. However, you can reduce the likelihood of its activation by using the following strategies:

  • Increase the amount of GPU memory available for Unity to use.

  • Disable ambient occlusion. Open the Lighting window (menu: Window > Rendering > Lighting). In the Lightmapping Settings interface, disable Ambient Occlusion.

  • Bake only indirect light. Set all your light sources to Realtime or Mixed. Make sure that no light sources are set to Baked. If you use the mixed approach, set Lighting > Mixed Lighting > Lighting mode to Baked Indirect.

  • Reduce the level of anti-aliasing in your project. Navigate to Project Settings > Quality and choose an option that takes fewer samples. For example, you might switch from 8x Multi Sampling to 2x Multi Sampling.

  • Reduce the quality of your lightmaps in your Lightmap Parameters Asset. Open the Lighting window, expand Lightmapping settings, and select a lower-resolution option for Lightmap parameters.

  • Reduce your lightmap resolution.

  • Use a CPU-based denoiser. To choose a denoiser, open the Lighting window, expand Lightmapping settings, set Filtering to Advanced and then select the denoiser for each type of lightmap target (Direct and Indirect). Only OpenImageDenoise is CPU-based. RadeonPro and Optix are GPU-based, but RadeonPro uses a lot more GPU memory.

Platform-specific limitations

On macOS it is more difficult to determine how much memory is available. As a result, fallback to CPU is more likely on this platform and it is a best practice to follow instructions for optimizing your bake speed.

如何优化烘焙速度

有多种方法可以减少烘焙时间并避免烘焙超过指定给 GPU 用于烘焙的 VRAM 的情况。

  • Close other GPU-accelerated applications. GPU-accelerated 2D image editing and 3D modelling software uses VRAM. Turn off accelerated graphics functionality or quit these applications.

  • Switch to a CPU-based denoiser. GPU-based denoisers also use VRAM capacity. Switch to a CPU-based option, like Intel Open Image, which uses system RAM instead.

  • Use Light Probes for smaller GameObjects. GameObjects such as debris or small props use up space in lightmaps but might not contribute significantly to the look of a scene. To optimize bake speed, disable Contribute Global Illumination for these GameObjects’ Mesh Renderers and light them with Light Probes instead.

  • Designate separate GPUs for rendering and baking. If your computer has more than one GPU, you can designate one for rendering and one for baking. See Configure GPU selection below.

  • Use a lower number of Anti-aliasing samples. The default value for this setting in the Lightmap Parameters Asset is 8. When you increase it, Unity uses more VRAM. When you are using a lightmap size of 4096 or above, this can quickly exceed the memory of many consumer GPUs.

Configure GPU selection

If you have at least two GPUs, you can specify one GPU for rendering the Scene and another for baking lighting. This might be desirable in cases where there is insufficient VRAM available for the default GPU to both render your scene and bake it using the Progressive GPU Lightmapper.
To change which GPU Unity uses for baking:
1. Open the Lighting window (menu: Window > Rendering > Lighting).
2. Navigate to the Workflow Settings section.
3. Use the GPU Baking Device drop-down menu to select a GPU.

渐进光照贴图程序
Lightmapping using Enlighten Baked Global Illumination
Copyright © 2023 Unity Technologies
优美缔软件(上海)有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961