Version: 2023.2
言語: 日本語
アンビソニックオーディオ
Audio Listener

オーディオクリップ

Audio clips contain the audio data used by Audio Sources. Unity supports mono, stereo, and multichannel audio assets up to eight channels. You can import the following audio file formats in Unity: .aif, .wav, .mp3, and .ogg. Unity also supports importing of tracker modules in the .xm, .mod, .it, and .s3m formats. The tracker module assets behave the same way as any other audio assets in Unity although no waveform preview is available in the asset import inspector.

オーディオクリップ インスペクター
オーディオクリップ インスペクター

オプション

Force To Mono

これを有効にすると、マルチチャンネルオーディオはパックする前にミックスダウンされモノラルトラックにされます。

Normalize

これを有効にすると、Force To Mono ミックスダウン処理中にオーディオは ノーマライズ されます。

Load In Background

これを有効にすると、メインスレッドを妨げることなく、クリップの読み込みは別のスレッドで遅延させて行われます。

Ambisonic

Ambisonic audio sources store audio in a format which represents a soundfield that can be rotated based on the listener’s orientation. It’s useful for 360-degree videos and XR applications. Enable this option if your audio file contains Ambisonic-encoded audio.

プロパティ

プロパティ 機能
Load Type Unity がランタイムで音声を読み込む方法。
Decompress On Load Audio files are decompressed as soon as they’re loaded. Use this option for smaller compressed sounds to avoid the performance overhead of decompressing on the fly. Be aware that decompressing Vorbis-encoded sounds on load will use about ten times more memory than keeping them compressed (for ADPCM encoding it’s about 3.5 times), so don’t use this option for large files.
Compressed In Memory Keep audio compressed in memory and decompress while playing. This option has a slight performance overhead, especially for Ogg/Vorbis compressed files. Use it only for files that consume excess memory for the Decompressed on Load. The decompression happens on the mixer thread, which can be monitored in the DSP CPU section in the Audio pane of the Profiler window.
Streaming Decode continuous audio. This method uses a minimal amount of memory to buffer compressed data that’s incrementally read from the disk and decoded spontaneously. The decompression happens on a separate streaming thread whose CPU usage can be monitored in the Streaming CPU section in the Audio pane of the profiler window. Note: Streaming clips have an overhead of approximately 200KB, even if none of the audio data is loaded.
Compression Format ランタイムでサウンドに使用される形式。選択可能オプションは、どのビルドターゲットが選択されているかにによって変わります。
PCM This option offers higher quality at the expense of larger file size and is best for short sound effects.
ADPCM この形式は、足音や衝突音、武器などのノイズを多く含んでいて大量に再生される必要があるサウンドに便利です。圧縮率は PCM の3.5分の1ですが、CPU の使用量は MP3/Vorbis 形式に比べ格段に少なくなるため、上記のような種類の音には適しています。
Vorbis/MP3 圧縮ファイルは小さくなりますが PCM オーディオに比べると若干クオリティが落ちます。圧縮率は Quality スライダーの調整で可能です。この形式は中程度の長さの SE や音楽に適しています。
Sample Rate Setting PCM や ADPCM 圧縮形式では、サンプルレートの自動最適化あるいは手動による低減が可能です。
Preserve Sample Rate サンプルレートは変更されません(デフォルト)。
Optimize Sample Rate サンプルレートは、解析された最高周波数の成分に基づいて、自動で最適化されます。
Override Sample Rate This setting allows manual overriding of the sample rate, so effectively this might be used to discard frequency content.
Force To Mono When enabled, the audio clip is down-mixed to a single channel sound. After the down-mixing the signal is peak-normalized, because the down-mixing process typically results in signals that are more quiet than the original. The peak-normalized signal provides headroom for later adjustments through the volume property of AudioSource.
Load In Background When enabled, the audio clip loads in the background without causing stalls on the main thread. This is disabled by default to ensure the standard Unity behavior where all AudioClips complete loading as soon as the scene starts playing. Play requests on AudioClips that are still loading in the background are deferred until the clip is loaded. You can query the load state through the AudioClip.loadState property.
Preload Audio Data When enabled, the audio clip is pre-loaded after the scene is loaded. This is enabled by default to reflect standard Unity behavior where all AudioClips complete loading as soon as the scene starts playing. If this flag isn’t set, the audio data will either be loaded on the first AudioSource.Play AudioSource.PlayOneShot, or it can be loaded through AudioClip.LoadAudioData and unloaded again through AudioClip.UnloadAudioData.
Quality Determines the amount of Compression to be applied to a compressed clip. Doesn’t apply to PCM/ADPCM/HEVAG formats. Statistics about the file size can be seen in the inspector. A good approach to tuning this value is to drag the slider to a place that leaves the playback “good enough” while keeping the file small enough for your distribution requirements. Note that the original size relates to the original file, so if this was an MP3 file and Compression Format is set to PCM (uncompressed), the resulting Ratio will be bigger than 100% because the file is now stored uncompressed and taking up more space than the source MP3 that it came from.

プレビューウィンドウ

The Preview window contains the following icons:

  • Turn Auto Play On/Off - When Auto Play is on, the clips play as soon as they’re selected.

  • Turn Loop On/Off - When Loop is on, the clips play in a continuous loop.

  • Play - Plays the selected clip.

オーディオアセットのインポート

Unity supports a wide range of source file formats. Whenever importing a file, Unity transcodes to a format suitable for the build target and the type of sound. You can select this via the Compression Format setting in the inspector.

Typically, the PCM and Vorbis/MP3 formats are preferrable for keeping the sound as close to the original as possible. PCM is lightweight on the CPU requirements, because the sound is uncompressed and can just be read from memory. Vorbis/MP3 allows adaptive discarding with less audible information via the Quality slider.

ADPCM falls between memory and CPU usage as it uses only slightly more CPU than the uncompressed PCM option, but yields a constant 3.5 compression factor, which is in general about 3 times worse than the compression that can be achieved with Vorbis or MP3 compression. Furthermore ADPCM (like PCM) allows automatically optimized or manually set sample rates to be used, which – depending on the frequency content of the sound and the acceptable loss of quality – can further shrink the size of the packed sound assets.

Module files (.mod,.it,.s3m..xm) can deliver high quality with an extremely low footprint. When using module files, unless you specifically want this, make sure that the Load Type is set to Compressed In Memory, because if it’s set to Decompress On Load, the whole song will be decompressed.

As a general rule of thumb, Compressed audio (or modules) are best for long files like background music or dialog, while PCM and ADPCM is better for short sound effects that contain some noise, as the artefacts of ADPCM are too apparent on smooth signals. You should tweak the amount of Compression using the compression slider. Start with high-quality compression and gradually reduce the setting to the point where the loss of sound quality is perceptible. Then, increase it again slightly until the perceived loss of quality disappears.

プラットフォーム固有の詳細

Unity はさまざまなソース形式のサウンドファイルのインポートに適応しています。ただし、インポートするとき、これらのファイル (トラッカーファイル以外) は常にビルドターゲット形式に再エンコードされます。必要な場合はプラットフォームごとに他の形式 (ADPCM、MP3など) にオーバーライドされますが、デフォルトではこの形式は Vorbis 形式です。 * For audio clip support on Linux, make sure you’ve installed the ffmpeg package.

AudioClip

アンビソニックオーディオ
Audio Listener
Copyright © 2023 Unity Technologies
优美缔软件(上海)有限公司 版权所有
"Unity"、Unity 徽标及其他 Unity 商标是 Unity Technologies 或其附属机构在美国及其他地区的商标或注册商标。其他名称或品牌是其各自所有者的商标。
公安部备案号:
31010902002961