レンダーテクスチャはレンダリングを行なうことができるテクスチャです。
They can be used to implement image based rendering effects, dynamic shadows,
projectors, reflections or surveillance cameras.
One typical usage of render textures is setting them as the "target texture" property
of a Camera (Camera.targetTexture), this will make a camera render into a texture
instead of rendering to the screen.
Keep in mind that render texture contents can become "lost" on certain events, like loading a new level, system going to a screensaver mode, in and out of fullscreen and so on.
When that happens, your existing render textures will become "not yet created" again,
you can check for that with IsCreated function.
As with other "native engine object" types, it is important to pay attention to the lifetime of
any render textures and release them when you are finished using them with the Release function,
as they will not be garbage collected like normal managed types.
A render texture only has a data representation on the GPU and you need to use Texture2D.ReadPixels to transfer its contents to CPU memory.
The initial contents of a newly created render texture are undefined. On some platforms and APIs the contents will default to black, but you shouldn't depend on this. You can use LoadStoreActionDebugModeSettings to highlight undefined areas of the display, to help you debug rendering problems in your built application.
See Also: Camera.targetTexture.
| active | 現在アクティブなレンダーテクスチャ |
| antiAliasing | レンダーテクスチャのアンチエイリアスレベル |
| autoGenerateMips | Mipmap levels are generated automatically when this flag is set. |
| bindTextureMS | If true and antiAliasing is greater than 1, the render texture will not be resolved by default. Use this if the render texture needs to be bound as a multisampled texture in a shader. |
| colorBuffer | RenderTexture のカラーバッファ（読み取り専用） |
| depth | The precision of the render texture's depth buffer in bits (0, 16, 24 and 32 are supported). |
| depthBuffer | RenderTexture の深度/ステンシルバッファ（読み取り専用） |
| depthStencilFormat | The format of the depth/stencil buffer. |
| descriptor | This struct contains all the information required to create a RenderTexture. It can be copied, cached, and reused to easily create RenderTextures that all share the same properties. |
| dimension | レンダーテクスチャの次元 (形式) |
| enableRandomWrite | Shader Model 5.0 レベルのシェーダーでこのレンダーテクスチャにランダムアクセス書き込みを有効にします。 |
| graphicsFormat | The color format of the render texture. You can set the color format to None to achieve depth-only rendering. |
| height | ピクセル単位のテクスチャの高さ |
| memorylessMode | The render texture memoryless mode property. |
| sRGB | Does this render texture use sRGB read/write conversions? (Read Only). |
| stencilFormat | The format of the stencil data that you can encapsulate within a RenderTexture.Specifying this property creates a stencil element for the RenderTexture and sets its format. This allows for stencil data to be bound as a Texture to all shader types for the platforms that support it. This property does not specify the format of the stencil buffer, which is constrained by the depth buffer format specified in RenderTexture.depth.Currently, most platforms only support R8_UInt (DirectX11, DirectX12), while PS4 also supports R8_UNorm. |
| useDynamicScale | When this flag is set to true, render texture is set to be used by the Dynamic Resolution system. |
| useDynamicScaleExplicit | When this flag is set to true, render texture is set to be used by the Dynamic Resolution system. Scale is applied with an explicit call to ApplyDynamicScale |
| useMipMap | Render texture has mipmaps when this flag is set. |
| volumeDepth | Volume extent of a 3D render texture or number of slices of array texture. |
| vrUsage | If this RenderTexture is a VR eye texture used in stereoscopic rendering, this property decides what special rendering occurs, if any. |
| width | ピクセル単位のテクスチャの幅 |
| RenderTexture | 新規の RenderTexture オブジェクトを作成します |
| ApplyDynamicScale | Applies the Dynamic Resolution system scale. |
| ConvertToEquirect | Converts the render texture to equirectangular format (both stereoscopic or monoscopic equirect). The left eye will occupy the top half and the right eye will occupy the bottom. The monoscopic version will occupy the whole texture. Texture dimension must be of type TextureDimension.Cube. |
| Create | 実際に RenderTexture オブジェクトを作成します |
| DiscardContents | Hint the GPU driver that the contents of the RenderTexture will not be used. |
| GenerateMips | Generate mipmap levels of a render texture. |
| GetNativeDepthBufferPtr | 深度バッファリソースを指すネイティブ (グラフィックス API に内在する) のポインターを取得します。 |
| IsCreated | 実際に RenderTexture オブジェクトを生成しているか確認します |
| Release | RenderTexture オブジェクトを解放します |
| ResolveAntiAliasedSurface | Force an antialiased render texture to be resolved. |
| SetGlobalShaderProperty | プロパティーネームで RenderTexture オブジェクトにシェーダーを割りあてます |
| GetTemporary | 一時的なレンダリングテクスチャを割り当てます |
| ReleaseTemporary | GetTemporary 関数で割り当てられた一時的なテクスチャを解放します |
| SupportsStencil | RenderTexture にステンシルバッファがあるかどうか |
| allowThreadedTextureCreation | Allow Unity internals to perform Texture creation on any thread (rather than the dedicated render thread). |
| currentTextureMemory | The amount of memory that all Textures in the scene use. |
| desiredTextureMemory | The total size of the Textures, in bytes, that Unity loads if there were no other constraints. Before Unity loads any Textures, it applies the memory budget which reduces the loaded Texture resolution if the Texture sizes exceed its value. The desiredTextureMemory value takes into account the mipmap levels that Unity has requested or that you have set manually.For example, if Unity does not load a Texture at full resolution because it is far away or its requested mipmap level is greater than 0, Unity reduces the desiredTextureMemory value to match the total memory needed.The desiredTextureMemory value can be greater than the Texture.targetTextureMemory value. |
| GenerateAllMips | Can be used with Texture constructors that take a mip count to indicate that all mips should be generated. The value of this field is -1. |
| nonStreamingTextureCount | The number of non-streaming Textures in the scene. This includes instances of Texture2D and CubeMap Textures. This does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally. |
| nonStreamingTextureMemory | The amount of memory Unity allocates for non-streaming Textures in the scene. This only includes instances of Texture2D and CubeMap Textures. This does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally. |
| streamingMipmapUploadCount | How many times has a Texture been uploaded due to Texture mipmap streaming. |
| streamingRendererCount | Number of renderers registered with the Texture streaming system. |
| streamingTextureCount | Number of streaming Textures. |
| streamingTextureDiscardUnusedMips | This property forces the streaming Texture system to discard all unused mipmaps instead of caching them until the Texture memory budget is exceeded. This is useful when you profile or write tests to keep a predictable set of Textures in memory. |
| streamingTextureForceLoadAll | Force streaming Textures to load all mipmap levels. |
| streamingTextureLoadingCount | Number of streaming Textures with mipmaps currently loading. |
| streamingTexturePendingLoadCount | Number of streaming Textures with outstanding mipmaps to be loaded. |
| targetTextureMemory | The total amount of Texture memory that Unity allocates to the Textures in the scene after it applies the memory budget and finishes loading Textures. `targetTextureMemory`also takes mipmap streaming settings into account. This value only includes instances of Texture2D and CubeMap Textures. This value does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally. |
| totalTextureMemory | The total amount of Texture memory that Unity would use if it loads all Textures at mipmap level 0.This is a theoretical value that does not take into account any input from the streaming system or any other input, for example when you set the`Texture2D.requestedMipmapLevel` manually.To see a Texture memory value that takes inputs into account, use `desiredTextureMemory`.`totalTextureMemory` only includes instances of Texture2D and CubeMap Textures. This value does not include any other Texture types, or 2D and CubeMap Textures that Unity creates internally. |
| hideFlags | Should the object be hidden, saved with the Scene or modifiable by the user? |
| name | オブジェクト名 |
| anisoLevel | Defines the anisotropic filtering level of the Texture. |
| dimension | Dimensionality (type) of the Texture (Read Only). |
| filterMode | Filtering mode of the Texture. |
| graphicsFormat | Returns the GraphicsFormat format or color format of a Texture object. |
| graphicsTexture | GraphicsTexture that represents the texture resource uploaded to the graphics device (Read Only). |
| height | Height of the Texture in pixels (Read Only). |
| imageContentsHash | The hash value of the Texture. |
| isDataSRGB | Returns true if the texture pixel data is in sRGB color space (Read Only). |
| isReadable | Whether Unity stores an additional copy of this texture's pixel data in CPU-addressable memory. |
| mipMapBias | The mipmap bias of the Texture. |
| mipmapCount | How many mipmap levels are in this Texture (Read Only). |
| updateCount | This counter is incremented when the Texture is updated. |
| width | Width of the Texture in pixels (Read Only). |
| wrapMode | Texture coordinate wrapping mode. |
| wrapModeU | Texture U coordinate wrapping mode. |
| wrapModeV | Texture V coordinate wrapping mode. |
| wrapModeW | Texture W coordinate wrapping mode for Texture3D. |
| GetInstanceID | Gets the instance ID of the object. |
| ToString | Returns the name of the object. |
| GetNativeTexturePtr | Retrieve a native (underlying graphics API) pointer to the Texture resource. |
| IncrementUpdateCount | Increment the update counter. |
| Destroy | Removes a GameObject, component or asset. |
| DestroyImmediate | Destroys the object obj immediately. You are strongly recommended to use Destroy instead. |
| DontDestroyOnLoad | Do not destroy the target Object when loading a new Scene. |
| FindAnyObjectByType | Retrieves any active loaded object of Type type. |
| FindFirstObjectByType | Retrieves the first active loaded object of Type type. |
| FindObjectsByType | Retrieves a list of all loaded objects of Type type. |
| Instantiate | original のオブジェクトをクローンします |
| SetGlobalAnisotropicFilteringLimits | 異方性のリミットを設定します |
| SetStreamingTextureMaterialDebugProperties | This function sets mipmap streaming debug properties on any materials that use this Texture through the mipmap streaming system. |
| bool | オブジェクトが存在するかどうか |
| operator != | 二つのオブジェクトが異なるオブジェクトを参照しているか比較します |
| operator == | 2つのオブジェクト参照が同じオブジェクトを参照しているか比較します。 |